Channel connection unit with one or two 8-pin RJ45 sockets, Cat.6, A Component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT validatedCompliance with class E, A up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09Tested: Component up to 600 MHz, Link up to 800 MHz, for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, HF-technically optimized and ergonomically shaped LSA connection terminal, screwing of the flap for strain relief and shield removal takes place from the front, practical cable feed from 8 sides, connection of data cables AWG26/1 - 22/1 (single-wire), plug direction inclined 45° downwards, with viewing window for enclosed label insert, label sheet 209 x 294 mm see accessories, integrated dust protection flaps (also available in color), compatible with design center pieces of switch ranges, suitable for installation in standard flush-mounted cups and hollow-wall cups, cover parts pure white RAL 9010 or pearl white RAL 1013, variants: 1 port pure white, 1 port pearl white, 2 ports pure white, 2 ports pearl white
| Property | Value |
| Category: | 6A (IEC) |
| Color: | white |
| RAL number: | 9010 |
| Connection type: | LSA |
| Sockets shielded: | yes |
| Housing shielded: | yes |
| Separate earth connection: | no |
| With text field: | yes |
| Designable: | yes |
| Separate cable strain relief: | yes |
| Surface-mounted: | no |
| Installation type shield connection: | screw |
| Outlet direction: | slanted |
| With dust protection: | yes |
| Termination resistor: | no |
| Mechanical coding: | no |
| Color coding: | no |
| Device width: | 69.90 |
| Device height: | 69.90 |
| Device depth: | 39.50 |
| Flush-mounted: | yes |
| Duct installation: | yes |
| Floor tank/underfloor installation: | no |
| Fastening type: | screws |
| Composition: | Base element with central cover plate |
| Connector type: | RJ45 8 (8) |
| With sockets/couplings: | yes |
| Suitable for number of sockets/couplings: | 2 |
