KNX presence detector, multi-channel for 2-zone constant light control. Multi-channel presence detector with integrated bus coupler and 2 independent zone detections for ceiling installation for brightness and motion-dependent switching. The lighting control of zone 2 is proportional to zone 1. A parameter enables the selection of a proportionality coefficient. The presence detector also enables the KNX dimmer or the KNX/Dali interfaces to be controlled via an object for further lighting regulation. The sensor has a semi-automatic and an automatic operating mode. Basic settings can be made directly on the installed device without dismantling or optionally using the EE807 remote control or the EE808 customer remote control. Brightness range 5 - 1000 lux. Switch-off delay can be freely selected. Detection range: approx. 7 m at a mounting height of 2.5 m. Functions: Lighting ON/OFF, forced control, dimming value, dimming value when present and absent, time functions, scene, scene when present and absent, master/slave function. Reflection rate of the natural and artificial light value can be set via parameters. The device can be programmed using the KNX ETS or KNX easy.
