new system function: fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0, Intended use, Switching and brightness adjustment of lights with 1-10 V interface, Operation with suitable eNet radio transmitters, Installation in device box with dimensions according to DIN 49073 in combination with a suitable cover, Installation in surface-mounted housing or installation adapter (item no. FM-EBG) for false ceilings, Product features, Switch-on brightness can be permanently saved, Minimum brightness can be permanently saved, Scene operation possible, Status display of the 1-10 V participants via LED, Status feedback to radio transmitter, 1-10 V participants can be switched with the Prog button, 1-10 V interface is protected against polarity reversal, Can be set with eNet server:, Maximum brightness, Dimming speed, On/off delay, Up/down dimming ramp, Switch-off warning, Operating locks, Permanent on, Permanent off, hotel function, run-on time, additional functions with eNet server:, fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0, update of device software, repeater function, read error memory, nominal voltage: AC 230 V ~, 50/60 Hz, standby power: max. 0.5 W, ambient temperature: 25 ... +70 °C, contact type:, control voltage: 0.5 ... 11 V, control current: max. 50 mA, switching current, ohmic: 6 A, fluorescent lamps: 3 AX, connected load, ohmic load: 1380 W, capacitive load: 690 VA (560 F), connection type: screw terminals, single-wire: 1 x 0.75 ... 4 mm2, fine-wire with wire end ferrule: 1 x 0.75 ... 2.5 mm2, dimensions ( x H): 53 x 28 mm, total length of load cable: max. 100 m, total length of control cable: max. 100 m, radio frequency: 868.0 ... 868.6 MHz, transmission power: max. 20 mW, transmission range in free field: typically 100 m, receiver category: 2
