Catalog

ABB Stotz-Kontakt DS202C M C16 A10, FI/LS switch 10kA, 2P, type A, C 16, 10mA, 2CSR272140R0164

In stock
SKU: 198210
€216.07
Into a basketIn the basketGo

Overview

Residual current circuit breakers (RCBOs) offer protection for people and property as well as protection against electrically ignited fires in accordance with DIN0100-410 and DIN0100-530. They guarantee protection of single-phase circuits against overload and short-circuit currents, protection against sinusoidal alternating currents and pulsating currents with a smooth DC residual current component of up to 6 mA against earth. As well as fault protection (protection against indirect contact), additional protection (with I n 30 mA) and fire protection (with I n 300 mA). They meet the product standards IEC/EN 61009-1 (VDE 0664-20), IEC/EN 61009-2-1 (VDE 0664-21). Areas of application are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the DS202C fit for worldwide use., For networks with 2 phases 230 V AC (without N conductor) or mobile distributors supplied via Schuko plug (1P+N), such as: caravan applications., Rated switching capacity according to IEC/EN 61009 Icn = 10 kA., RCBO DS202C MA Type A is 2-pole protected (LS), 2-pole switching.

PropertyValue
Tripping characteristic:C
Rated current:16 A
Rated residual current:0.01 A
Rated voltage:230 V
Frequency:50/60 Hz
Number of poles (total):2
Width in modular spacing:2
Residual current type:A
Installation depth:69 mm
Rated breaking capacity according to IEC 60947-2:10 kA
Surge current strength:0.25 kA
Protection class (IP):IP2X
Energy limitation class:3
Overvoltage category:3
Pollution degree:2
Switching neutral conductor:yes
Number of protected poles:2
Suitable for flush-mounted installation:no
Voltage type:AC
False tripping protection:no
Rated insulation voltage Ui:500 V
Rated impulse withstand voltage Uimp:4 kV
Rated breaking capacity according to EN 61009:10 kA
Rated short-circuit breaking capacity Icn according to EN 61009-1:10 kA
Shutdown characteristics:instantaneous
With locking device:yes
Ambient temperature during operation:-25 to 55 °C
Connectable conductor cross-section, single-wire:25 mm²
Connectable conductor cross-section, stranded:1 to 25 mm²

Characteristics

Shutdown characteristicsWithout delay
Rated short-circuit breaking capacity Icn according to EN 61009-110 kA
HABDS202C M C16 A10
ManufacturerABB Stotz-Kontakt
HAN2CSR272140R0164
GTIN8012542118053
Connectable conductor cross-section solid25 mm²
Connectable conductor cross-section stranded1 to 25 mm²
Number of protected poles2
Trigger characteristicsC
Rated breaking capacity according to EN 6100910kA
Rated breaking capacity according to IEC 60947-210kA
Rated residual current0.01A
Rated insulation voltage Ui500V
Rated voltage230V
Rated impulse withstand voltage Uimp4kV
Rated current16A
Width in pitch units2
Installation depth69 mm
Energy limitation class3
False trigger protectionNo
Residual current typeA
Frequency50/60Hz
Suitable for flush-mounted installationNo
With locking deviceYes
Switching neutral conductorYes
Number of poles (total)2
IP protection)IP2X
Voltage typeAC
Surge current strength0.25kA
Ambient temperature during operation-25 to 55 °C
Degree of contamination2
Overvoltage category3
ABB Stotz-Kontakt DS202C M C16 A10, FI/LS switch 10kA, 2P, type A, C 16, 10mA, 2CSR272140R0164
ABB Stotz-Kontakt DS202C M C16 A10, FI/LS switch 10kA, 2P, type A, C 16, 10mA, 2CSR272140R0164
€216.07
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart