ABB Stotz-Kontakt DS252N-UC-K63/0.03, FI/LS combination, type B 10kA, 2P/N-UC, all-current sensor, K 63A, 30mA, 2CDR272568R1637

FI/LS combinations (RCBOs) offer protection for people and property as well as protection against electrically ignited fires in accordance with DIN0100-410 and DIN0100-530. The FI/LS combinations of the DS250N-UC series ensure protection against sinusoidal alternating currents, pulsating currents against earth and smooth DC residual currents with a wide range of (high/)frequencies. As well as fault protection (protection against indirect contact), additional protection (with I n 30 mA) and protection against electrically ignited fires (with I n 300 mA). They meet the product standards for type A DIN EN 61009-1 (VDE 0664-20) appendix G and type B DIN EN 60947-2 (VDE 0660-101). The DS250N-UC series are special FI/LS combinations for use in the area of direct current local transport railways, particularly within the overhead line area. They were developed based on the above product standards and correspond exactly to the recommendations of VDV document 509 (10/08): Use of residual current (FI) protective circuits in electrical power systems of direct current local transport railways. , The DS250N-UC consists of an all-current sensitive FI block (type B) and an LS part with one or three outer conductor poles in AC design as well as two oppositely connected neutral conductor poles in UC design - for the polarity-independent shutdown of direct currents (N-UC: N pole for universal current)., This means that the high compensating direct currents between the neutral conductor of the general network and the DC earth (the return conductor of the direct current railway network) - or vice versa - can be safely switched off.