Cabinet, univers, IP54, SK I, 1950 x 300 x 205 mm, empty. Stand-alone distributor for indoor installation, with VDE certificate (production monitoring) according to IEC 439, corresponds to 0660/500 and DIN EN 61 439, dimensional standard DIN 43 870 for surface mounting. For setting up a low-voltage distribution up to 355 A, 3AC 230/400 V / 50 Hz. Protection class IP44/IP54, air and creepage distances according to DIN0110/1-2. Consists of a cabinet with door made of powder-coated, baked-on, sturdily profiled 1 mm thick sheet steel. Inner lining made of plastic. Universal cable entries installed at the top and bottom of each panel (protection class I open at the bottom), rear knockout in the plastic part and busbar bushings as side knockouts on both sides in the lower area. Horizontal support rail included for stabilization in the cabinet. Door flush with internal, adjustable hinges, can be opened on the right or left with an opening angle of 110°. Door lock with (no suggestions) three-point locking. Door lock can be replaced with other locks. Cabinets can be flanged next to each other. 100 mm skirting board mounted in series, with removable front panel.
