The device is used to record up to 100 fault messages via ABB i-bus®. Fault messages are processed in the module and forwarded to a display. The SMB/S 1.1 supports the message types specified in DIN 19 235.
Fault message module, REG The device is used to record up to 100 fault messages via ABB i-bus®. Fault messages are processed in the module and forwarded to a display. The SMB/S 1.1 supports the message types specified in DIN 19 235. The fault message module SMB/S 1.1 is used to record up to 100 fault messages via ABB i-bus® EIB / KNX. The fault messages are processed in the module and can be forwarded to an optical display via ABB i-bus® EIB / KNX. Furthermore, an optical and an acoustic collective message is available. Messages can be acknowledged and data losses are reported. Sensors can be monitored cyclically. The SMB/S 1.1 supports the following message types defined in DIN 19 235: 1.Message with continuous light 2.New value message with single flashing light 3.First value message with single acknowledgement 4.Motor message The current values can be queried centrally. The connection to the bus is established via the bus connection terminal. Bus connection via bus connection terminal Protection class IP 20, DIN EN 60 529 Installation on 35 mm mounting rail, DIN EN 60 715 Width 2 modules 18 mm Manufacturer ABB STOTZ-KONTAKT Type SMB/S 1.1
