Compact KNX security solution for detecting and reporting attempted break-ins, robberies and technical faults. The device has 2 monitored inputs and 2 relay outputs. A 12 V DC SELV auxiliary voltage is required.
Security terminal, 2-way, flush-mounted Compact KNX security solution for detecting and reporting attempted break-ins, robberies and technical faults. The device has 2 monitored inputs and 2 relay outputs. A 12 V DC SELV auxiliary voltage is required. The security terminal MT/U 2.12.2 is used as an interface between security technology sensors and the KNX. The device has 2 inputs, so-called detector groups. They are used for the monitored connection of passive detectors (e.g. magnetic contacts and/or glass break sensors) to ABB i-bus® KNX and/or for the connection of potential-free contacts in applications with increased safety requirements. The device can be used as a system with independent alarm logic or in combination with the security module or an intrusion alarm system with KNX interface. Functions of the application program: -Monitoring 12 V DC auxiliary power supply -Direct and delayed arming -Internal (presence) and external (absence) arming -Detector types (interior, exterior, hold-up, sabotage detectors, technical detectors, locking detectors) -Reset input and arming input -Detector monitoring (closed-circuit, open-circuit principle, primary line with 2.7 kOhm terminating resistor, arming line with sabotage monitoring) -Detector groups can be switched off -Alarm types (burglary, hold-up, sabotage alarm, Technical alarm) -Freely programmable relay outputs Inputs2 detector groups Outputs2 relay outputs, internally bridged with 12 V DC, max. short-circuit current 0.6 A each Auxiliary power supply12 V DC SELV auxiliary voltage is required Connection technologyScrew terminals Bus connectionBus connection terminal Protection classIP 20 according to EN 60 529 InstallationFlush-mounted in device junction box 60 mm Dimensions ( x H) 54 x 28 mm ManufacturerABB STOTZ-KONTAKT TypeMT/U 2.12.2
