Surface-mounted small distributor, without door, with plug-in terminals. N+PE each 3 x 2.5 - 16 + 14 x 1.5 - 4 mm. Additional N-FI terminal 3 x 16, 2 x 10 mm. Dimensions W x H x D (mm) 300 x 370 x 106. TE each 18 mm 24/28. Rows 2. Surface-mounted small distributor, without door. Protection class: IP 30. For devices up to 63 A. Distributor base plate made of plastic, standard with fixing for the incoming and outgoing cables and pre-knockouts for rear and side cable entries. Pre-knockouts for cable ducts. Device rows for 12 TE (can be expanded to 14 TE). Color: RAL 9016 (traffic white). Built according to DIN0603-1, DIN 43871. PE/N terminal with screws, touch-proof, with easy-to-install locking of the PE+N carrier. From 2-row version with additional FI-N terminal. For built-in devices from 51 to 68 mm. With lowered device support rail (accessory) also built-in devices up to 88 mm can be used. Solid door as optional accessory. Solid doors:. Made of sheet steel, powder-coated. Standard with door operation using flush-fitting designer handle, folds back. Door opening angle over 180°. Door can be hinged either on the right or left. Color: RAL 9016, traffic white.