Floor-standing housing, 225 mm deep, SP series, double-insulated Y . External dimensions W x H x D (mm) 1050 x 1980 x 225. Width 4. Height 12. PLE 576. Floor-standing housing, 225 mm deep, SP series. Protection class II (SP series), protection class I (SE series). Protection type: IP54. For devices up to 630 A. Floor-standing installation with external fastening. Widths: 300, 550, 800, 1050, 1300 mm. Height: 1980 mm, including 130 mm base, assembled. Depth: 225 mm. Color: RAL 9016 (traffic white). Space units: 144 to 720. Material: 1.5 mm (doors 2 mm) sheet steel, powder-coated. Pre-punched on both sides for M6 housing connections. Cable entries 2K membrane flange below 35x, above 35x per field. Can be combined horizontally and vertically. Door surface-mounted, can be hinged on the right or left with an opening angle of 270°, 3mm double-bit lock with 3-point rod lock. Prepared for the installation of standardized module kits on NT support profiles or for continuous mounting plates. DIN EN 61439-1 (VDE0660 Part 600-1).
