Catalog

Benning 044104 IT115 DIN VDE0100 installation tester

In stock
SKU: 759905
€1,174.86
Into a basketIn the basketGo

Overview

Benning IT 115. True RMS installation tester. Multifunctional installation tester for testing electrical systems in accordance with DIN0100-600, IEC 60364-6 and DIN0105-100, EN 50110. Graphic display. Graphic display with backlight, help function with connection diagram. Limit value display yes. Measurements: Insulation resistance measurement yes. Insulation resistance 0.01 MOhm - 1000 MOhm. Nominal test voltage 50 V. Nominal test voltage 100 V. Nominal test voltage 250 V. Nominal test voltage 500 V. Nominal test voltage 1000 V. Resistances of insulating floors and walls yes. Low-resistance measurement yes. Low-resistance resistance 0.01 Ohm - 2000 Ohm, test current 200 mA with polarity reversal, and continuity, test current 7 mA. Earthing measurement yes, using the 3-wire method optionally using earthing set 044113. Loop resistance/impedance measurement yes. Loop measurement without RCD/FI tripping yes. Line impedance 0.01 Ohm - 10 kOhm LN/ L, with voltage drop and short-circuit current. Loop impedance 0.01 Ohm - 10 kOhm L-PE, without RCD/FI tripping and short-circuit current. Internal network resistance measurement yes. Determination of short-circuit current/overcurrent protective devices yes. RCD/FI test yes. Curve shape for RCD/FI test for residual current circuit breakers type A, F. RCD/FI test with increasing residual current yes. RCD/FI analysis function yes. Testing of RCD/FI circuit breakers standard and delayed (S), type AC, A, F with AUTO test, contact voltage, tripping time and tripping current with ramp test. Rotary field test yes. Voltage measuring range AC/DC 1 V - 550 V. True RMS measurement method. Frequency measuring range 0 Hz - 500 Hz. Special features: Green/red LED for good/bad indication on the test device. Online voltage monitor. Battery charging function integrated in the device. Includes bag, test cable with protective contact plug, universal 3-wire test cable length = 1.5 m, 3 x test probes/crocodile clips, charger with 6 rechargeable NiMH AA batteries, calibration certificate, fuse 0.315 A (757211)

PropertyValue
Display:graphic
Insulation resistance measurement:yes
Surge arrester test:no
Loop resistance/impedance measurement:yes
Internal network resistance measurement:yes
RCD/FI test:yes
RCD/FI test with increasing fault current:yes
RCD/FI analysis function:yes
Rotational field test:yes
Low resistance measurement:yes
Earth measurement:yes
Selective earth measurement:no
Earth loop measurement:no
Specific earth measurement:no
Measured value memory:no
Interface:no
Printer connection:no
Limit value display:yes
Resistances of insulating floors and walls:yes
Loop measurement without RCD/FI tripping:yes
Determination of short-circuit current/overcurrent protection devices:yes
Integrated printer:no
Remote control of the test device:no
Insulation resistance measurement with ramp function:no
Curve shape for RCD/FI testing:for residual current circuit breakers type A, F
Measuring leakage currents with adapter:no
Low-resistance measurement with ramp function:no
PRCD test type S, Type K:no
Checking e-charging stations, simulating vehicle status:no
Checking IMDs and RCMs:no
Structured measured value storage:no

Characteristics

HABIT115 VDE0100
ManufacturerBenning
HAN044104
GTIN4014651441040
InterfaceNo
Benning 044104 IT115 DIN VDE0100 installation tester
Benning 044104 IT115 DIN VDE0100 installation tester
€1,174.86
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart