BENNING MM 2-2 True RMS digital multimeter for industry, service and electrical trades. Digital display. 4-digit LCD display (6,000 points). Backlight of the LC display. Smallest resolution for direct voltage 0.01 mV. Max. voltage measuring range DC 1000 V. Smallest resolution for alternating voltage 0.01 mV. Max. voltage measuring range AC 1000 V. Smallest resolution for direct current 1 mA. Max. current measuring range DC 10 A. Smallest resolution for alternating current 1 mA. Max. current measuring range AC 10 A. Smallest resolution for resistance 0.1 Ohm. Max. resistance measuring range 60 MOhm. Smallest resolution for capacitance 0.01 nF. Max. capacitance measuring range 10000 µF. Smallest resolution for frequency 10 Hz. Max. frequency measuring range 1 kHz. Continuity test (< 30 - 480 )/ diode test (3.0 V). True RMS measuring method. Ergonomic housing with large display and lighting. Robust rubber protective frame for increased grip and shock resistance. Optical and acoustic socket control (A range) with warning to protect against incorrect conditions (fuse protection). Volt sensor for contactless and single-pole phase and cable break testing (2 sensitivities) (LCD/buzzer). Fast continuity/diode test (optical/acoustic). Automatic measuring range selection. Automatic switch-off. Automatic low battery indication. Instantaneous value memory Data HOLD. Measured value memory. Maximum value memory MAX. Minimum value memory MIN. Average value memory AVG. Relative value measurement REL. Measuring circuit category CAT IV. Max. voltage measuring circuit category 300 V. Measuring circuit category CAT III. Max. voltage measuring circuit category 600 V. Includes silicone measuring leads with gold-plated 2 mm and 4 mm measuring tips (screw-on), rubber protective frame, bag, 2 x 1.5 V Micro/AAA/LR03 batteries, 11 A fuse (10218772).
| Property | Value |
| Max. Voltage measuring range AC: | 1000 V |
| Measuring range selection: | manual/automatic |
| Display: | digital |
| With level measurement (dB): | no |
| Frequency measurement: | yes |
| Capacitance measurement: | no |
| Analog bar display: | no |
| Multiple display: | no |
| Smallest resolution AC voltage: | 0.01 mV |
| Max. Voltage measuring range DC: | 1000 V |
| Smallest resolution direct voltage: | 0.01 mV |
| Max. current measuring range AC: | 10 A |
| Smallest resolution alternating current: | 1000 µA |
| Max. current measuring range DC: | 10 A |
| Smallest resolution direct current: | 1000 µA |
| Max. Resistance measuring range: | 60 MOhm |
| Lowest resistance resolution: | 0.1 Ohm |
| Continuity test/diode test: | yes |
| Relative value measurement: | yes |
| Inductance measurement: | no |
| Conductance measurement: | no |
| Instantaneous value memory (Data Hold): | yes |
| Maximum value memory: | yes |
| Minimum value memory: | yes |
| Peak value memory: | no |
| True RMS measurement: | yes |
| Duty cycle measurements: | no |
| Measurement value memory: | yes |
| Interface: | no |
| Measurement circuit category: | CAT IV |
| Analog bar display analog/logarithmic: | no |
| Bluetooth interface: | no |
| Speed measurement: | no |
| Continuity test: | yes |
| Explosion-tested version: | no |
| IR interface: | no |
| Cable length measurement: | no |
| Smallest resolution frequency: | other |
| Smallest resolution capacitance: | 0.00001 µF |
| Smallest resolution temperature: | other |
| Power and energy measurement: | no |
| Line symmetry test for two-wire connections abE: | no |
| Max. frequency measuring range: | 50 kHz |
| Max. capacitance measuring range: | 10000 µF |
| Max. Voltage measuring circuit category: | 300 V |
| Milliohm measurement with 4-wire technology (Kelvin connection): | no |
| Nominal test voltage 10 V: | no |
| Nominal test voltage 100 V: | no |
| Nominal test voltage 1000 V: | no |
| Nominal test voltage 250 V: | no |
| Nominal test voltage 50 V: | no |
| Nominal test voltage 500 V: | no |
| Harmonics analysis/Power Quality: | no |
| Circuit breaker: | no |
| Temperature measurement RTD: | no |
| Temperature measurement TC: | no |
