Berker 170106 IR presence detector polar white matt home electronics

IR presence detector motion detector polar white, matt Operating voltage 230 V~ Frequency 50/60 Hz 230 V incandescent and halogen lamps 2300 W electronic transformers 1500 W conventional transformers 1500 VA fluorescent lamps parallel compensated 1000 W compact fluorescent lamps 23 x 23 W Power consumption (standby) approx. 270 mW Power consumption (operation) approx. 2.4 VA Recommended installation height approx. 2.5 - 3.5 m Detection field on the floor approx. diameter 7 m Detection field at desk height approx. diameter 5 m Detection angle 360 ° Response brightness adjustable approx. 5 - 1000 lx Follow-up time adjustable approx. 1 - 60 min Operating temperature -10 ... +60 °C Dimensions (diameter x H) 78 x 70 mm Installation wall thickness 10 - 28 mm Installation opening diameter 60 - 63 mm Conductor cross-section flexible 0.5 - 1.5 mm Conductor cross-section rigid 0.5 - 1.5 mm - with spring clips for ceiling installation - energy saving through presence and brightness-dependent switching of lighting - operating modes: semi-automatic, automatic, learning, day, corridor, office, test mode - with potentiometers for setting response brightness and run-on time without dismantling - linking several detectors to extend the detection range - on button (normally open) - extensions can be switched on and off with subsequent triggering - with red and green acknowledgement/reception LEDs - with screw terminals The presence detector is used to save energy by switching off the lighting when someone is absent and the ambient brightness is sufficiently high. Areas of application e.g. in office buildings, schools, hotels and retirement homes.