Rotary potentiometer 1-10 V with control knob and frame Integro Flow anthracite, matt - 230 V~, 50/60 Hz - with soft detent - with push-off switch - for switching and controlling electronic ballasts and Tronic transformers with 1-10 V interface - e.g. for fluorescent lamps and low-voltage halogen lamps - basic brightness adjustable - short-circuit and overload proof (fine fuse) - with spare fuse - with screw terminals - switching current 6 A - control current 50 mA - installation depth 22 mm - axis dimension diameter 4 mm Interface DIN EN 60928 If inrush currents are too high, inrush current limiters must be used. To ensure the same lighting levels, only use electronic ballasts and fluorescent lamps from the same manufacturer. Fuse can be changed without removing the cover. When using low-voltage halogen lamps, we recommend Berker Tronic transformers with 1-10 V interface. No installation possible with Integro contact protection boxes, surface-mounted housings and mounting clamp rings.