Busch rotary dimmer, Busch dimmer, flush-mounted rotary dimmer, Busch rotary dimmer flush-mounted, LED, 2-100 W With rotary operation, pressure sequence changeover switch and soft locking. 2-wire connection technology (neutral conductor not required). Optimized for dimming retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi). For dimmable retrofit LED lamps (LEDi) on conventional or electronic transformers. For incandescent lamps, 230 V halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable halogen energy-saving lamps. Mixed load operation with LEDi and conventional lamps possible. Can be switched between leading and trailing edge phase control using a selector switch. Low noise thanks to the use of MOSFET transistors. Short-circuit proof and overload proof (electronic fuse). With adjustable minimum brightness. Without central disk. Nominal voltage: 230 V~, + 10 % / - 10 % Nominal frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads). Protection class (device): IP 20 Temperature range (device): 0 °C to 35 °C IEC 60669-2-1, British Standard EN 60669-2-1
Take complete control of your lighting with the Busch-Jaeger 6523 U-102 Rotary Dimmer, specifically designed to optimize LED and low-energy lighting systems. This dimmer allows for smooth, flicker-free dimming, ensuring that your lights function at their best, whether you’re using LED, energy-saving bulbs, or traditional lighting up to 100 watts.