Busch-Jalousiecontrol II insert, flush-mounted mounting boxes and inserts, inserts for blind control/timers, Busch-Jalousiecontrol II insert Suitable for roller shutter, blind and awning drives with mechanical or electronic limit switch-off. With two 230 V extension inputs (up/down) for group control. Possibility of connecting brightness sensor 6414-101 and glass break detector 6413. With operating mode switch for operating modes: normal, slat, central, position, awning. With party function (deactivation of the local control point) in combination with Busch-Jalousiecontrol II control element 6430-xx-xxx, 6066-xx-xxx. Wind alarm, cleaning function can be implemented via extension input. For control element 6430-xx-xxx. For IR control element 6066-xx-xxx. For comfort timer control element 6455-101. Running time: 3 min Rated voltage: , +10 % / -10 % Rated frequency: 50 Hz Outputs: 2x normally open contacts Rated current: 3 A, at cos 0.5 Rated power: 690 VA Control/signal outputs: 2 Temperature range device: 0 °C to 35 °C
