Empty housing made of robust plastic for on-site assembly as a socket combination for construction sites, festival sites, event technology, etc. The delivery consists of a head section, foot section, 2 x side walls, rear wall, door and mounting accessories. The head section can be used to mount 2 control and signaling devices 22.5 mm. The foot section contains integrated strain relief for outgoing flexible cables. The side walls are provided with carrying handles. The left side wall contains mounting options for the supplied cable glands up to PG36, the earthing set or a wall device plug 32A or 63A (not included in delivery). The rear wall contains the connection compartment with cover and a distribution compartment with transparent cover for DIN rail mounted devices 12 TE for size Q4 or 24 TE for size Q6. The closed cover for the connection compartment can be exchanged for a cover for distributors if required. Below the connection compartment, different IEC sockets can be switched and/or installation boxes for IEC sockets or additional distributors can be quickly and easily mounted in existing holes. The door contains a recess so that cables can be routed even when the door is closed. The doors and distributor covers can be fitted with a security lock on site. The housing can be attached directly to the floor or to the wall. Wall mounting is also possible using the wall brackets provided. A base frame (Art. No. GW68463) is also available for free-standing installation.
