ABB Stotz-Kontakt E295-PS, continuous signal module 250 VAC, 1A, 18mm, 2TAZ312005R1003

The E295-PS continuous signal module is an add-on module that enables the impulse switch to be controlled via a continuous signal. After receiving the continuous signal (e.g. via a timer), the impulse switch changes its contact position and at the same time the coil of the main module is released by the attached continuous signal module. When using a continuous signal module, the impulse switch cannot be operated manually because the switch handle is covered. This ingenious solution is particularly useful if the impulse switch is controlled via a timer, a twilight switch, a motion detector or another switch with a changeover contact (e.g. changeover switch, relay, time relay, etc.)