60mV shunts must be used with a maximum load of 0.25 Ohm in combination with DC measuring instruments. They have an accuracy class of 0.5 (10 to 30 °C).
| Property | Value |
| Overcurrent limiting factor: | FS 5 |
| Secondary connection: | Screw connection |
| With touch protection: | yes |
| Design: | Through-hole current transformer |
| Primary rated current In: | 600 A |
| Secondary rated current: | 5 A |
| Secondary rated apparent power: | 10 VA |
| Accuracy class: | 0.5 |
| Snap fastening: | no |
| Number of primary entrances: | 1 |
| With copper bar: | no |
| Certified: | no |
| Opening diameter: | 50 mm |
