Catalog

Brumberg 45003560 quad.sw / ws built-in module

In stock
SKU: 872472
€21.61
Into a basketIn the basketGo

Overview

Installation housing, square, recessed, flush with module holder, pivoting, outside structural black / inside structural white, square. All Brumberg MR16 LED modules can be used for the M1 installation unit up to the maximum specified power. The installation depth of the luminaire depends on the LED module used. The LED module is not included in the scope of delivery of the installation unit. Design: without socket, installation type: recessed installation, installation location: ceiling mounting, material: aluminum, protection class on the room side: according to DIN EN 60529: IP20, protection class: (EN 61140) III, power: 14W, number of lamps / sockets: 1.0 pcs, adjustability: pivoting, with control gear: no, type of dimming: depends on the control gear.

PropertyValue
Housing color:black
Housing material:aluminum
Protection rating (IP):IP20
Protection class:III
With light source:no
With operating device:no
Suitable for built-in mounting:yes
Length:105 mm
Width:105 mm
Height/depth:3 mm
With motion detector:no
Suitable for lamp power:14 W
Suitable for ceiling mounting:yes
Light distribution:symmetrical
Operating device:LED operating device, current-controlled
Suitable for number of lamps:1
Installation width:92 mm
Installation length:92 mm
Covering of the lamp with thermal insulation material possible:no
Suitable for power rail mounting:no
Adjustability:rotatable and pivotable
Suitable for clamp mounting:no
Suitable for pendulum suspension:no
Suitable for pedestal/floor mounting:no
Suitable for truss mounting:no
With light sensor:no
Suitable for surface mounting:no
Suitable for cable system:no
Brushed surface:no
Dimming depending on the operating device:no
Dimming 0-10 V:no
Dimming 1-10 V:no
Dimming DALI:no
Dimming DMX:no
Dimming DSI:no
Dimming potentiometer (device-integrated):no
Dimming GPRS:no
Dimming LineSwitch:no
Dimming manufacturer-specific:no
Dimming mains voltage modulation:no
Dimming trailing edge:no
Dimming leading edge:no
Dimming programmable:no
Dimming RF:no
Dimming Sine Wave Reduction:no
Dimming Touch and Dim:no
Dimming Zigbee:no
Dimming with push button:no
Without Dimming function:no
Light emission:direct

Characteristics

HAB45003560 quad.sw / ws
ManufacturerBrumberg
HAN45003560
GTIN4251433930990
Covering the luminaire with thermal insulation material possibleNo
Operating deviceLED control gear current controlled
Width105 mm
Dimming 0-10 VNo
Dimming 1-10 VNo
Dimming DALINo
Dimming DMXNo
Dimming DSINo
Dimming GPRSNo
Dimming LineSwitchNo
Dimming mains voltage modulationNo
Dimming trailing edgeNo
Dimming phase controlNo
Dimming potentiometer (integrated)No
Dimming RFNo
Dimming Sine Wave ReductionNo
Dimming Touch and DimNo
Dimming ZigbeeNo
Dimming depends on the control gearNo
Dimming manufacturer-specificNo
Dimming with push buttonNo
Dimming programmableNo
Installation width92 mm
Installation length92 mm
Suitable for surface mountingNo
Suitable for ceiling mountingYes
Suitable for flush mountingYes
Suitable for clamp mountingNo
Suitable for lamp power14W
Suitable for number of lamps1
Suitable for pendulum suspensionNo
Suitable for podium/floor mountingNo
Suitable for rope systemNo
Suitable for busbar mountingNo
Suitable for truss mountingNo
Housing colorBlack
Height/Depth3 mm
Light emissionDirect
Light distributionSymmetrical
Length105 mm
With operating deviceNo
With motion detectorNo
With light sourceNo
With light sensorNo
Brushed surfaceNo
Without dimming functionNo
IP protection)IP20
Protection classIII
AdjustabilityRotatable and pivotable
Housing materialAluminum
Brumberg 45003560 quad.sw / ws built-in module
Brumberg 45003560 quad.sw / ws built-in module
€21.61
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart