Blind compact timer, complete set, blind management, blind control without extension, blind compact timer, complete set Suitable for roller shutter and blind drives with mechanical or electronic end position shutdown. Without extension input. Consists of blind compact timer 6422 U. Consists of future linear central disk for timer control element 6435-84. Consists of future linear cover frame, 1-way 1721-184. Running time: 3 min N-conductor connection required. For manual and time-controlled switching of roller shutters and blinds. Memory function for easy saving of switching times. Manual operation of the shading possible at any time. Simple setting via display with segment display and backlight. Switching times preset at the factory, individual adjustment possible. 2 switching times per day for each day of the week, freely adjustable. Automatic summer / winter time changeover (can be switched off). Switching times and programs are stored in a way that is safe from power failure. Power reserve for time and date > 10 years. Easy switching for manual/automatic/holiday operation. Programming is only possible with the control element plugged in when the power is on. Nominal voltage: , +10 % / -10 % Nominal frequency: 50 Hz Outputs: 2x normally open contacts Nominal current: 3 A, at cos 0.5 Nominal power: 690 VA Device temperature range: 0 °C to 45 °C
