Doepke 09134818HD DFS4 040-4/0,03-A EV HD residual current circuit breaker

Residual current circuit breakers (RCCB) switch off the power supply when dangerously high residual currents occur. In this way, they protect people, animals and systems. DFS 4 are two- or four-pole residual current circuit breakers for single- or three-phase networks. In the standard version, the compact devices are four division units wide. They are available with many different residual current types and versions with rated currents of up to 125 A. The large double-deck terminals can also accommodate large conductor cross-sections. The tripped position of the multi-function switch toggle makes troubleshooting easier. The free label software helps with labeling. Type A switches are sensitive to pulse and alternating current. This function is independent of the mains voltage. EV version switches are intended for use in charging devices for electric vehicles. They have an additional function for detecting smooth DC residual currents >= 6 mA. In this way, they protect upstream residual current circuit breakers of type A or F from malfunctions. With an airtight encapsulated release made of a special alloy and the stainless steel switch lock, residual current circuit breakers in HD design are particularly protected against corrosion, harmful gases, moisture and strong temperature fluctuations. Properties: additional function dependent on the mains voltage for detecting smooth direct residual currents, tripping threshold of 6 mA for smooth direct residual currents, LED display for operation of additional function, no additional wiring required, validated, tripping independent of the mains and auxiliary voltage, sensitive to alternating and pulsating direct residual currents (type A), small size for all rated currents, high short-circuit strength, double-sided double-deck terminals for large conductor cross-sections and rail connection, switch position indicator, viewing window for labeling labels, multi-function switch toggle with three positions: 'on', 'off', 'tripped', connection C1 neutral conductor position on the left, also available as N on the right at no extra charge, mounting type: quick fastening on mounting rail, installation position as desired, feed direction as desired, areas of application: these RCCBs are intended exclusively for use in facilities for charging electric vehicles. Use to protect systems in which electronic equipment can cause residual currents with frequencies other than 50 Hz is excluded. All-current sensitive residual current circuit breakers of type B or B+ must be used here.