Faster installation thanks to innovative luminaire construction. Combination of LED device carrier and cover. Individually replaceable branded components for the lowest maintenance costs UV-stable, shatter-proof IK08/IP66 polycarbonate housing with frosted cover ensures shadow-free light distribution 5-pin through-wiring with two internal luminaire connection terminals 2 full-fledged cable glands & blind plugs Rust-proof stainless steel fasteners with integrated anti-theft device Mounting accessories included (chain/ceiling/wall mounting) including rear panel punchings POWERselect: Dimmable in 10 steps of approx. 2.5 watts each (25-39 watts via dip switch in the luminaire) additionally via remote control 50-100% The 5139 remote control is required to set the sensor. Any number of luminaires can be set with one remote control. For installation heights of 4m and above, we recommend the long range remote control 5452. The light retains the set values even in the event of a temporary power failure. Three different functions of the high frequency sensor are possible: On/off function via sensor, then 0% light intensity On/off function via sensor with adjustable afterglow duration/brightness ON function via sensor, then permanent basic brightness (10% / 30% brightness) In addition, the following values can be set in stages: Range (25/50/100% up to 7m) Daylight sensor (5 / 15 / 50Lux / deactivated) Lighting duration (5s / 1min / 5min / 10min) Afterglow duration (0s / 1min / 30min / permanent) Afterglow brightness (10% / 30%) The D mark of this light with limited surface temperature is a basic requirement for lights in fire-hazardous areas (DIN EN 60598-2-24,0711-2-24) This LED light is suitable for use in food processing plants. This means that it can also be used in areas that are certified according to the International Featured Standard (IFS) or British Retail Consortium (BRC). Sustainable, re
