Catalog

Eaton 197506 EASY-E4-DC-12TC1P easyE4 with display control relay

In stock
SKU: 766874
€173.37
Into a basketIn the basketGo

Overview

Electronic control relay easyE4 with a rated operating voltage of 24 VDC. 8 digital inputs with 24 VDC are available, of which 4 inputs can also be used as analog inputs and 4 inputs as fast counters. The control relay has 4 transistor outputs for 24 VDC. The control relay easy-E4 is equipped with a display, a clock, an integrated Ethernet interface and push-in terminals. The control relay easyE4 can be expanded with the digital input/output extensions of the easyE4 series and with EASY-COM-... communication modules.

PropertyValue
Output digital:4
Input analog:4
Input digital:4
Voltage AC 50Hz:0 V
Voltage AC 60Hz:0 V
Voltage DC:20.4 to 28.8 V
Protection class (IP):IP20
Switching current:0.5 A
Height:90 mm
Width:72 mm
Depth:58 mm
Performance level according to EN ISO 13849-1:without
With relay output:no
Voltage type:DC
Expandable:yes
With timer:yes
With display:yes
Wall/direct mounting possible:no
Front installation possible:yes
Rail mounting possible:yes
Rack mounting possible:no
Wireless standard Bluetooth:no
Wireless standard WLAN 802.11:no
Suitable for safety functions:no
Basic device:no
Extension device:no
IO-Link Master:no
With optical interface:no
Supports protocol for SERCOS:no
Supports protocol for DeviceNet Safety:no
Supports protocol for PROFINET IO:no
Supports protocol for INTERBUS:no
Supports protocol for AS-Interface Safety at Work:no
Supports protocol for PROFIBUS:no
Supports protocol for SafetyBUS p:no
Supports protocol for PROFIsafe:no
Supports protocol for Data-Highway:no
Supports protocol for DeviceNet:no
Supports protocol for EtherNet/IP:no
Supports protocol for TCP/IP:yes
Supports protocol for other bus systems:no
Supports protocol for Modbus:yes
Supports protocol for SUCONET:no
Supports protocol for CAN:no
Supports protocol for ASI:no
Supports protocol for PROFINET CBA:no
Supports protocol for KNX:no
Supports protocol for LON:no
Supports protocol for Foundation Fieldbus:no
Supports protocol for INTERBUS-Safety:no
Number of HW interfaces Industrial Ethernet:1
Associated equipment (Ex ia):no
Associated equipment (Ex ib):no
Explosion protection category for gas:without
Explosion protection category for dust:without
Redundancy capability:no
GPRS radio standard:no
SIL according to IEC 61508:without
GSM radio standard:no
UMTS radio standard:no

Characteristics

Supports protocol for KNXNo
With optical interfaceNo
HABEASY-E4-DC-12TC1P easyE4 with display
ManufacturerEaton
HAN197506
GTIN4015081940844
Width72 mm
Explosion protection category for gasWithout
Explosion protection category for dustWithout
Suitable for security functionsNo
Height90 mm
With displayYes
Performance Level according to EN ISO 13849-1Without
SIL according to IEC 61508Without
IP protection)IP20
Voltage typeDC
Depth58 mm
Mounting rail possibleYes
Supports protocol for AS-Interface Safety at WorkNo
Supports protocol for ASINo
Supports protocol for CANNo
Supports data highway protocolNo
Supports protocol for DeviceNetNo
Supports protocol for DeviceNet SafetyNo
Supports protocol for EtherNet/IPNo
Supports protocol for Foundation FieldbusNo
Supports protocol for INTERBUSNo
Supports protocol for INTERBUS-SafetyNo
Supports protocol for LONNo
Supports protocol for ModbusYes
Supports protocol for PROFIBUSNo
Supports protocol for PROFINET CBANo
Supports protocol for PROFINET IONo
Supports protocol for PROFIsafeNo
Supports protocol for SERCOSNo
Supports protocol for SUCONETNo
Supports protocol for SafetyBUS pNo
Supports protocol for TCP/IPYes
Supports protocol for other bus systemsNo
Eaton 197506 EASY-E4-DC-12TC1P easyE4 with display control relay
Eaton 197506 EASY-E4-DC-12TC1P easyE4 with display control relay
€173.37
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart