Catalog

Eaton 199344 PKE-COM-RTU for connection to Modbus RTU functional element

In stock
SKU: 840172
€77.19
Into a basketIn the basketGo

Overview

Functional element for connecting the PKE with trip blocks PKE-XTU(W)A(CP)-... to Modbus RTU, attachment to motor protection switch PKE, messages: switch position PKE, all phase currents in %, thermal load in %, tripped messages (overload, short circuit, ...), set value overload release, set value short circuit release, type of trip block, trip and switch-on counter, commands: remote shutdown of motor protection switch, plug with connection terminals included in delivery, can be used for PKE12, PKE32, PKE65

PropertyValue
Height:65 mm
Width:67.5 mm
Depth:75 mm
Type of supply voltage:DC
Protection class (IP):IP20
Suitable for safety functions:no
Rack mounting possible:no
IO-Link Master:no
Supply voltage for DC:15 V
Wireless standard WLAN 802.11:no
Wall/direct mounting possible:no
Front installation possible:no
Performance level according to EN ISO 13849-1:without
Wireless standard Bluetooth:no
System component:yes
With electrical isolation:yes
Field bus connection possible via separate bus coupler:no
Mounting rail mounting possible:no
Associated equipment (Ex ia):no
Associated equipment (Ex ib):no
Explosion protection category for gas:without
Explosion protection category for dust:without
Supports protocol for AS-Interface Safety at Work:no
Supports protocol for SERCOS:no
Supports protocol for CAN:no
Supports protocol for KNX:no
Supports protocol for EtherNet/IP:no
Supports protocol for MODBUS:yes
Supports protocol for other bus systems:no
Supports protocol for PROFINET CBA:no
Supports protocol for Foundation Fieldbus:no
Supports protocol for TCP/IP:no
Supports protocol for Data-Highway:no
Supports protocol for ASI:no
Supports protocol for PROFIsafe:no
Supports protocol for DeviceNet:no
Supports protocol for SUCONET:no
Supports protocol for LON:no
Supports protocol for DeviceNet Safety:no
Wireless standard GPRS:no
Wireless standard GSM:no
Supports protocol for PROFIBUS:no
Supports protocol for SafetyBUS p:no
Supports protocol for INTERBUS:no
Supports protocol for INTERBUS-Safety:no
Supports protocol for PROFINET IO:no
SIL according to IEC 61508:without
Radio standard UMTS:no

Characteristics

Type of voltage of the supply voltageDC
Supports protocol for KNXNo
HABPKE-COM-RTU for connection to Modbus RTU
ManufacturerEaton
HAN199344
GTIN4015081975921
Width67.5 mm
Explosion protection category for gasWithout
Explosion protection category for dustWithout
Suitable for security functionsNo
Height65 mm
Performance Level according to EN ISO 13849-1Without
SIL according to IEC 61508Without
IP protection)IP20
Depth75 mm
Mounting rail possibleNo
Supports protocol for AS-Interface Safety at WorkNo
Supports protocol for ASINo
Supports protocol for CANNo
Supports data highway protocolNo
Supports protocol for DeviceNetNo
Supports protocol for DeviceNet SafetyNo
Supports protocol for EtherNet/IPNo
Supports protocol for Foundation FieldbusNo
Supports protocol for INTERBUSNo
Supports protocol for INTERBUS-SafetyNo
Supports protocol for LONNo
Supports protocol for ModbusYes
Supports protocol for PROFIBUSNo
Supports protocol for PROFINET CBANo
Supports protocol for PROFINET IONo
Supports protocol for PROFIsafeNo
Supports protocol for SERCOSNo
Supports protocol for SUCONETNo
Supports protocol for SafetyBUS pNo
Supports protocol for TCP/IPNo
Supports protocol for other bus systemsNo
Eaton 199344 PKE-COM-RTU for connection to Modbus RTU functional element
Eaton 199344 PKE-COM-RTU for connection to Modbus RTU functional element
€77.19
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart