ELSO CCT570003 Indoor motion detector ARGUS 360° white

Ceiling motion detector for indoor use. 360 degree area monitoring. Attractive, flat design. Automatic switching of the lighting on and off. Quick and easy setting of the brightness threshold and switching duration. The device consists of the sensor head and a power unit with a permanently connected connecting cable (length 35 cm). Installation of the sensor head in a 63 mm ceiling cut-out. Functions: -Motion detection using passive infrared technology. 2 outputs (e.g. 1x light + 1x fan). Mains voltage: AC 220-240 V, 50 Hz. Max. switching current: 10 A, AC 220-240 V, cos Phi 0.6. Nominal power: Output 1: -LED lamps: 100 W. Incandescent lamps AC 230 V: 1000 W. Halogen lamps AC 230 V: 900 W. Halogen with electronic transformer: 250 VA. Halogen with iron core transformer: 500 VA. Fluorescent tubes: 200 VA. Capacitive load (6 A test current): 21 uF. Capacitive load (10 A test current): 14 uF. Compact fluorescent lamps: 100 W. Output 2: relay switching capacity: AC 250 V, 5 A (cos Phi 1). Motor: 100 W. Upstream fuse: 10 A. Own consumption: < 2 W. Detection angle: 360 degrees. Range: radius of max. 3.5 m (at 2.5 m installation height). Light sensor (sensitivity): 5-1000 lux. Time setting: Time 1: from approx. 30 s to approx. 30 min. Time 2: from approx. 10 s to approx. 15 min. Switching mode: automatic. Connection: 3-wire, neutral conductor required. Operating temperature: at room temperature. Protection class: IP 20. EC directives: Low Voltage Directive 2006/95EC and EMC Directive 2004/108/EC. Color: white. Dimensions (LxWxH): Sensor 100x81x45 mm. Power section: 106x57x34 mm.