ELSO MTN5570-1019 presence detector ARGUS Slave, polar white

For controlling all ARGUS presence masters with PL input. The device has four PL outputs. For the control function via PL, a separate wire is required for each PL line in the installation to the respective receiving master devices. Presence detector for ceiling mounting indoors. The sensor module detects moving heat sources (e.g. people) in an adjustable detection area and starts a stairwell lighting time. When movement is detected, the Argus presence slave sends this information to the Argus presence master(s). The master controls the lighting. The brightness is measured at the installation location of the master. For installation in a 60 mm flush-mounted box or in the surface-mounted housing available as an accessory. With claw and screw fastening. With screw terminals. Functions: -Global control via four PL outputs. Stairwell lighting function independent of brightness. Nominal voltage: AC 220/230 V, 50/60 Hz. Outputs: 4xPL. Neutral conductor: required (3-wire system). Connection cross-section: max. 2x2.5 mm. Detection angle: 360 degrees. Number of levels: 6. Number of zones: 136. Number of motion sensors: 4. Recommended installation height: 2.5 m. Range: radius of max. 7 m (at a installation height of 2.50 m). Sensitivity: continuously adjustable. Color: polar white.