Only calibrated meters are permitted for electricity billing according to paragraph 25 of the German Calibration Act. Failure to comply is an administrative offence according to paragraph 19. Mobile three-phase meter with CEE plug 32A and CEE coupling 32A. Suitable for indoor and outdoor use. Maximum current 32A, standby loss only 0.5 watts per path. Housing dimensions 180x86x82 mm, connection cable 1.5 m (incl. plug and coupling). Accuracy class B (1%). This mobile three-phase meter measures the active energy based on the currents flowing between the inputs and outputs. The self-consumption of a maximum of only 0.5 watts of active power per path is not measured and not displayed. The starting current is 40mA. The display can only be read when there is a power supply. However, the consumption is stored non-volatilely and is immediately displayed again after a power failure. The digital display has 7 digits. Up to 99999.99 kWh, two decimal places are displayed. From 100000.0 kWh, only one. The power consumption is shown in the display with a bar that flashes 100 times per kWh. Technical data: Operating voltage: 400V, 50Hz. Rated current: 32A. Housing protection class: IP54. Plug and coupling: IEC 60309, 3P+N+PE, 6h, red. Protection class: IP44. Cable cross-section: 5x6mm². Cable length including plug and coupling: 1.50m. Meter data: Operating voltage: 3x230/400V, 50Hz. Extended range -20%/+15%. Reference current Iref (limit current Imax): 3x0.5-10(80)A. Own consumption of active power: 0.5W per path. Display: LC display 7 digits, of which 1 or 2 decimal places. Accuracy class for ±1%: B. Starting current according to accuracy class B: 40mA. Type examination certificate: 0120/SGS0204. Operating temperature: -25/+55°C. Mechanical ambient conditions: Class M1. Electromagnetic environment: Class E2.
