Blister pack dimming with radio button F2T55E and universal dimmer switch FUD61NPN-230V. Smart home sensor and smart home actuator. F2T55E: radio button pure white glossy for single installation 80x80x15mm or installation in the E-Design55 switch system. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. Radio buttons with a rocker can send two evaluable signals: press the rocker up and press the rocker down. The mounting plate can be screwed onto a flat surface or stuck to the wall, glass or furniture with the included adhesive film. The sleeves in the box are used for screw fastening over a 55mm switch box. FUD61NPN-230V: universal dimmer switch, power MOSFET up to 300W. Automatic lamp detection. Standby loss only 0.7 watts. Minimum brightness or dimming speed adjustable. With children's room, snooze and light alarm switch. Also with light scene control. Encrypted radio, bidirectional radio and repeater function can be switched on. For recessed installation. 45mm long, 45mm wide, 33mm deep. Universal dimmer switch for lamps up to 300W, depending on the ventilation conditions. Dimmable 230V LED lamps and dimmable energy-saving lamps ESL also dependent on the lamp electronics. Zero-crossing switching with soft on and soft off to protect the lamp. Supply, switching and control voltage locally 230V. No minimum load required. The set brightness level is saved when switched off (memory).
