Catalog

Eltako 30001066 BPD55-D62 dimming wireless push button set

In stock
SKU: 824887
€113.52
Into a basketIn the basketGo

Overview

Blister pack dimming with radio button F2T55E-wg and radio universal dimming actuator FD62NPN-230V. Smart home sensor and smart home actuator. F2T55E-wg: radio 2-channel button in E-Design55, 80x80mm outside, frame inner dimensions 55x55mm, 15mm high. Generates the energy for radio telegrams even when the button is pressed, therefore no connection cable and no standby loss. With rocker. Smart home sensor. Radio buttons with a rocker can send two evaluable signals: press the rocker up and press the rocker down. The mounting plate can be screwed onto a flat surface or stuck to the wall, glass or furniture with the included adhesive film. The sleeves in the box are used for screw fastening over a 55mm switch box. FD62NPN-230V: wireless universal dimmer actuator. With power MOSFET. Dimmable 230V LED lamps in trailing edge mode up to 300W, or in leading edge mode up to 100W, depending on the ventilation conditions. 230V incandescent and halogen lamps up to 300W, depending on the ventilation conditions. No inductive (wound) transformers. With children's room and snooze function. No minimum load. Standby loss only 0.5 watts. For built-in installation. 49x51mm, 20mm deep. The connection terminals are plug-in terminals for conductor cross-sections from 0.2mm² to 2.5mm². Up to 32 wireless universal buttons, wireless direction buttons, wireless central control buttons and motion sensors can be taught in using the convenient tap technology. Bidirectional radio can be activated. Switching in zero crossing with soft on and soft off to protect the lamp. Local supply, switching and control voltage 230V. The set brightness level is saved when switched off (memory). If the supply voltage fails, the device is switched off in a defined manner. Automatic electronic overload protection and overtemperature shutdown. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally with a conventional 230V control button that may be mounted in front of it. A glow lamp current is not permitted.

Property Value
Mounting type: Flush-mounted
Radio frequency: 868 MHz
Number of commands: 32
Color: blue
Material: Plastic
Halogen-free: yes
Surface: other
Mounting type: other
Material quality: Thermoplastic
Surface finish: matt
Suitable for protection class (IP): IP20
Suitable for dimmer: yes
Suitable for pulse pushers: no
Suitable for roller shutter switches: no
Suitable for switches: no
Rolling code system: yes
In the housing: yes
In the tube base housing: no
As a module/circuit board: no
Touch operation: yes
Switching operation: no
With radio handheld transmitter: no
With radio coding device: no
With radio button: no
Suitable for blind switches: no
Suitable for blind/roller shutter switches: no
Transparent: no

Characteristics

Suitable for dimmersYes
HABBPD55-D62 Dimming
ManufacturerELTAKO
HAN30001066
GTIN4010312324271
Surface finishFrosted
Mounting typeOther
ColorBlue
Suitable for protection class (IP)IP20
Halogen freeYes
Mounting typeFlush-mounted
SurfaceOther
TransparentNo
MaterialPlastic
Material qualityThermoplastic
Eltako 30001066 BPD55-D62 dimming wireless push button set
Eltako 30001066 BPD55-D62 dimming wireless push button set
€113.52
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart