Presence detector with 360° detection area for ceiling mounting. Range of up to 24 m in diameter with a recommended mounting height of 3 m. 2.0 m pre-assembled WAGO WINSTA® supply and discharge line. Automatic light control of DALI or DALI-2 operating devices to a constant brightness level depending on presence and daylight. Permanently stored factory program for immediate operational readiness. Simple programming via remote control with 'blue mode' technology or via setting elements. Integrated changeover switch for setting via remote control or setting controller - avoids incorrect operation and as sabotage protection. Sources of interference are blocked out by reducing the sensitivity using a DIP switch. Additional button input per channel. Detector can be used as a fully or semi-automatic device. Reduction of light output after the run-on time has elapsed as an orientation light for corridors and passageways, adjustable between 10-50%. Integrated switch-off warning. Standard version as a flush-mounted device. Surface-mounted or ceiling-mounted installation with accessories. Cover panel and design ring can be easily changed/painted (available in the color 'silver' as an accessory). Extension of the detection area by connecting slave devices. Targeted masking of areas using the enclosed lens mask.
