Witty start 11/22kW charging station with key switch and Type 2 charging socket. Wallbox charging station with UV-resistant plastic housing for charging electric or plug-in hybrid vehicles. Mode 3 charging mode in accordance with EN 61851, protected by the charging station's supply line. Charging station with Mode 3 socket Type 2 32 A (3-phase). Permanently installed charging station for indoor/outdoor use. Free use or access authorization possible via key switch. Consists of wall housing, cable entry for power supply, key switch, USB interface and LED display. The power supply of the charging station must have a separate circuit. Connecting several charging stations to the same circuit is not permitted. Each charging station must be protected with a combined residual current device and circuit breaker (RCBO) Type A or separately with a residual current device (RCD) Type A and a circuit breaker (MCB). A type B residual current device is not necessary because a 6 mA DC residual current detection is integrated. The charging controller is ready for use when delivered, but further settings can be made using the rotary control or the USB interface. Note: Various stands are available for freestanding installation.
