Suspended luminaire for single or continuous lighting applications with emergency lighting. Product features: Each LED with individual lens and reflector for UGR < 16 and homogeneous light distribution. Conversion kit for emergency lighting according to IEC 60598-2-22 (driver and 3 hours of battery operation for emergency lighting) included. Easy maintenance thanks to automatic self-test for emergency lighting according to IEC 60598-2-22. Suspended installation with suspension kit. Can be connected to form a seamless continuous lighting line using a mechanical connector (when surface or suspended). Versions with length 1200 or 1500 mm available. Luminous flux up to 6550 lm. Luminous efficacy: up to 120 lm/W. Initial color consistency: 3 SDCM (threshold unit). Glow wire test according to IEC 60695-2-12: 850 °C. Service life (L70/B50): 60,000 h (at 25 °C). Product advantages: Homogeneous light distribution and reduced glare thanks to the IndiviLED® optics. Emergency lighting function in accordance with IEC 60598-2-22 with emergency lighting driver and battery. Low-flicker light thanks to special electronic ballast. Increased lighting comfort with direct and indirect beam characteristics. Up to 50% energy savings compared to T5 light strips. Robust housing with IK06. Areas of application: Direct replacement for luminaires with fluorescent lamps. Offices, schools. General interior lighting. Corridors, entrance areas. Seamless light strips. Shop lighting. Technical equipment: Ceiling connection box available. Suspension set available. Mechanical connector available. Through-wiring set available.
| Property | Value |
| Max. System power: | 42.00 W |
| Rated luminous flux according to IEC 62722-2-1: | 5050 lm |
| Color temperature: | 4000 K |
| Length: | 1199.00 mm |
| Width: | 120.00 mm |
| Socket: | without |
| Height/Depth: | 40.00 mm |
| Protection class (IP): | IP20 |
| Protection class: | I |
| Pendant length: | 1500 mm |
| Material of the housing: | aluminium |
| Suitable for computer workstations in accordance with EN 12464-1: | yes |
| With light source: | yes |
| With operating device: | yes |
| Nominal voltage: | 220 to 240 V |
| Suspension included: | no |
| Light source: | LED not replaceable |
| Housing color: | white |
| Design of the Grid: | other |
| Reflector: | without |
| Suitable for light strip configuration: | no |
| Direct/indirect components separately adjustable: | no |
| Light distribution: | symmetrical |
| Light emission: | direct/indirect |
| Impact resistance: | IK06 |
| Luminaire with limited surface temperature 'D-mark': | no |
| Color rendering index CRI: | 80-89 |
| Suitable for emergency lighting: | yes |
| Light color: | white |
| Voltage type: | AC |
| Dimming 0-10 V: | no |
| Dimming 1-10 V: | no |
| Dimming DALI: | no |
| Dimming DMX: | no |
| Dimming programmable: | no |
| Dimming DSI: | no |
| Dimming RF: | no |
| Dimming potentiometer (device integrated): | no |
| Dimming LineSwitch: | no |
| Dimming manufacturer-specific: | no |
| Dimming mains voltage modulation: | no |
| Dimming trailing edge: | no |
| Dimming leading edge: | no |
| Dimming Sine Wave Reduction: | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Dimming with push button: | no |
| Without dimming function: | yes |
| Light distributor: | Focus lens |
| Glow wire test according to IEC 60695-2-11: | 850 °C - 30 s |
| Power factor: | 0.90 |
| Rated service life L70/B50 at 25 °C: | 60000 h |
| Type of wiring: | suitable for through wiring |
| Number of poles: | 2 |
