Dimmable electronic ballast 1.10 V for KLL. Product features: Control via 1.10 V interface. Supply voltage: 220.240 V. Mains frequency: 0 Hz, 50 Hz, 60 Hz. Mains voltage: 198.264 V. Dimming range: 3,100% luminous flux. Lamp start: within 0.6 s. Service life: > 100,000 h (at T = 65 °C at Tc). Automatic safety shutdown in the event of a lamp defect or at the end of the lamp's life (EoL T.2). Energy efficiency index EEI: A1 BAT. Overtemperature protection through thermal management at high tc temperatures. Safety: in accordance with EN 61347-2-3. Lamp operation: according to EN 60929. Radio interference suppression: according to EN 55015:2006+A1:2007+A2:2009/CISPR 15. Mains current harmonics according to EN 61000-3-2. Immunity, interference resistance according to EN 61547. Product advantages: Same luminous flux for direct and alternating voltage. Perfect lamp warm start for applications with motion detectors. Dimming of amalgam lamps without flickering or shortening of service life. Maximum efficiency thanks to cut-off technology. Automatic restart after lamp replacement. Ballasts meet MINERGIE standard thanks to very low standby consumption. Configurable emergency power properties. Control via 1.10 V interface. Areas of application: Suitable for use in emergency lighting systems in accordance with EN 50172 / DIN0108-100. Industry. Open-plan offices, corridors or storage rooms. Public buildings. Suitable for luminaires of protection class I.
