Catalog

Legrand 415965 DX3 AFDD C10 1P+NR 10KA 30MA A fire protection switch

In stock
SKU: 934915
€111.27
Into a basketIn the basketGo

Overview

Legrand fire protection switch DX3 STOP ARC. According to EN 62606,0665-10, EN 61009-1,0664-20. AFDD with FI/LS switch, 1-pole with switching neutral conductor, type A for alternating and pulsating direct residual currents, undelayed, rated residual current Idn 30 mA, surge current resistant up to 250 A. LS circuit breaker part: C characteristic, rated current In 10 A, rated switching capacity Icn 10 kA in accordance with EN 61009-1, rated voltage Un 230 VAC, rated frequency 50 Hz, energy limitation class 3, fastening on top hat rail EN 60715 using snap-in fastenings, clear information on the front of each device, clear switch position indicator red/green on the switch lever, with label window, neutral conductor connection on the right, can be mounted using Legrand fork comb rails. Auxiliary devices can be attached. Tripping indicator: yellow = residual current or test button tripping, colorless = short circuit or manual tripping. The DX3 STOP ARC fire protection switch is a device combination of an arc fault protection device (AFDD) with a residual current circuit breaker and a miniature circuit breaker. The single-pole protected and double-pole switched AFDD with FI/LS switch offers a safe all-pole shutdown in the event of the following faults: residual current to earth, overload, short circuit, parallel and serial arc faults. With LED status display for detecting the operating status, signal display for visual detection when an arc fault is triggered. The AFDD unit monitors itself using an internal daily self-test. Causes of arc faults include: Damaged conductor insulation caused by nails, screws or holes, crushed cables or lines, loose or faulty terminals in sockets or screw connections.

Property Value
Rated current: 10 A
Number of poles: 2
Tripping characteristics: C
Rated residual current: 0.03 A
Rated voltage: 230 V
Frequency: 50 Hz
Width in modular spacing: 3
Energy limitation class: 3
Residual current type: A
Switching neutral conductor: yes
Protection class (IP): IP20
Control voltage type additional device: AC
Overvoltage category: 3
Pollution degree: 2
Additional equipment fitted at the factory: other
Rated breaking capacity according to EN 61009: 10 kA

Characteristics

Insert Module TypeLight switch covers
HABDX3 AFDD C10 1P+NR 10KA 30MA A
ManufacturerLEGRAND
HAN415965
GTIN3414971179608
Trigger characteristicsC
Rated breaking capacity according to EN 6100910kA
Rated residual current0.03A
Rated voltage230V
Rated current10A
Width in pitch units3
Energy limitation class3
Residual current typeA
Frequency50Hz
Switching neutral conductorYes
Number of poles2
IP protection)IP20
Degree of contamination2
Overvoltage category3
Legrand 415965 DX3 AFDD C10 1P+NR 10KA 30MA A fire protection switch
Legrand 415965 DX3 AFDD C10 1P+NR 10KA 30MA A fire protection switch
€111.27
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart