Connection unit for mounting on a TH35 mounting rail in accordance with DIN EN 60715 in electrical distributors for domestic and industrial installations equipped with an E-DAT Industry RJ45 field jack insert Plug direction vertical, 90° to the mounting rail Compliance with class EA in accordance with ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 Suitable for 10GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus and UPoE) and HDBaseT Easy-to-install connection of the 2 to 4 pair data cable AWG 24/1 - 22/1 and stranded conductor with 7-wire CU strand AWG 26/7 to BTR 8-way IDC insulation displacement terminals The width of 1TE enables the installation of up to 12 devices in a standard electrical distributor when installed as a device In protection class I, the potential equalization is carried out via a switchable, integrated potential equalization spring directly via the mounting rail, which is to be connected to the building potential equalization via corresponding contact terminals. Variants: Wiring according to T568A, T568B or PROFINET
