Heating mats including 1x corrugated pipe , Voltage: 230 VAC , Heating mat output power: 150 W/m , It is recommended not to exceed the floor temperature of 27° , Minimum storage temperature: -20 °C , Minimum installation temperature: -10 °C , Installation width: 0.5 m , Cold end length: 4 m , Heating conductor diameter 1.18 - 1.62 mm , Safe solution for laminate and parquet floors , Electrical safety through earthing , Cost-effective and energy-saving , Simple floating installation , The heating mat with aluminum foil is ideal as a comfort heater for heating your floor. , The system can be laid under laminate, parquet, PVC, cork or carpet. , The heating mat is for all types of rooms and, thanks to its ultra-thin construction, also ideal for applications that require a low floor structure. , The two-core heating mat consists of two layers of reinforced aluminum foil, between which the heating conductors are installed. , The heating conductors consist of stranded wires surrounded by electrical insulation made of high-quality fluoropolymer. A flat two-core cold end is connected to the heating conductors. The metallic braid around the cold end, which is electrically connected to the aluminum foil, as well as the aluminum foil itself, serve to implement the electrical protective measures.
| Property | Value |
| Width: | 500 mm |
| With controller: | no |
| Area: | 5 m² |
| Power: | 150 W/m² |
| Connection voltage: | 230 V |
| Application: | Underfloor heating |
| With support mat: | yes |
| With room thermostat: | no |
