, Designed to be suspended from a single suspension point , Works in conjunction with standard PROTEC hangers to support a wide range of base materials , The range consists of two predetermined lengths of wire with heat treated toggles forming the end points and a choice of safe working loads. , Ensure the hole is no larger than 12mm diameter , One fixing point per hanger , Can be fixed to cable ducts at ground level , Legs should not exceed 60 degrees , Self levelling , Height can be adjusted at the operator level and not at the fixing , PVC protective cover to prevent wire on wire friction , High strength galvanised wire construction 1960N/mm grade 7x7 , BSEN 12385 standard , Reduces the use of studwork and duct
