Front connector module with 1x16-pin IDC connection for digital 2 A output modules of the S7-1500. Potential supply via screw terminal. The front connector module for SIMATIC S7-1500 with screw terminals for potential supply, for connecting a 16-pin connecting cable, is a modified front connector for connecting to a digital 2 amp output module. This is plugged into the module to be wired instead of the front connector. The connecting cable is plugged in here and connected to the connection module. This modified front connector module is part of the fully modular connection of SIMATIC TOP connect for the fastest and safest system cabling. In addition to a low wiring effort, sources of error in the cabling can be significantly reduced. Actuators from the periphery are connected to the SIMATIC TOP connect connection modules and connected to the SIMATIC S7-1500 via a connecting cable and front connector module.
