Unshielded connecting cable for SIMATIC S7-300/1500 0.14mm2 between front connector module 4x16-pin and connection module 1x50-pin with IDC connectors, L = 2.5 m The 50-pin round cable (unshielded) with a length of 2.5m is pre-assembled with 4 x 16-pin IDC connectors on the front connector module side and a 50-pin IDC connector on the connection module side. This pre-assembled cable enables a trouble-free and secure signal flow. This means that even complex installations remain manageable and can be checked in the shortest possible time, which is particularly affordable for maintenance and expansions. This pre-assembled connecting cable is part of the fully modular connection of SIMATIC TOP connect for the fastest and safest system cabling. In addition to reducing wiring effort, sources of error in cabling can be significantly reduced. Sensors and actuators from the periphery are connected to the SIMATIC TOP connect connection modules and connected to the SIMATIC S7-300/1500 via a connecting cable and front connector module.
