Catalog

Theben 2060760 theMura S180 Slave B UP motion/presence detector

In stock
SKU: 546480
€66.91
Into a basketIn the basketGo

Overview

Passive infrared motion/presence detector for flush-mounted wall mounting, slave version, without cover frame, cover frame for integration into common switch programs available as an accessory, semi-circular detection range 170° up to 14x17 m, restriction of the detection range possible, integrated button (can be blocked)

Property Value
Depth: 32 mm
Width: 68 mm
Height: 68 mm
Design: Motion detector
Color: white
Nominal voltage: 230 V
RAL number (similar): 9010
Material: Plastic
Mounting type: Flush-mounted
Protection class (IP): IP20
Type of voltage: AC
Max. Range to one side: 7 m
Scan angle: 170 °
Suitable for wall mounting: yes
Creep-under protection/rear field monitoring: no
Temperature: -15 to 45 °C
Adjustable response brightness: yes
Adjustable response sensitivity: yes
Max. Frontal range: 17 m
Sensor type: passive infrared
Optimal installation height: 1.2 m
Surface finish: glossy
Surface: untreated
Material quality: thermoplastic
Detection field diameter on floor: 17 m
Horizontal detection angle: 0 to 170 °
Frequency: 50 to 60 Hz
Halogen-free: no
Constant light control: no
HVAC control: no
Forced shutdown: no
Animal corridor: no
Networkable: yes
Staircase monitoring: yes
Bypass switch: no
Suitable for wireless transmission: no
Remote controllable: no
With signal unit: no
Alarm function: no
Teach function for response brightness: no
Dimming function with dimming insert: no
Transparent: no
With remote control: no
Suitable for C load: no
With DALI interface: no
Extension input: no
Forced switching on: no
Suitable for ceiling mounting: no
Connection type: Plug-in terminal
Antibacterial treatment: no
Impact resistance: IK04
Min. inrush current: 0.1 A
Diameter: 68 mm
Installation width: 68 mm
Installation depth: 32 mm
Min. depth of device box: 35 mm

Characteristics

Bridging switchNo
With signal unitNo
Forced shutdownNo
Scanning angle170 °
Forced switching onNo
HABTheMura S180 Slave B UP
ManufacturerTHEBEN
HAN2060760
GTIN4003468200179
Dimming function with dimming insertNo
Alarm functionNo
Connection typePlug-in terminal
Response sensitivity adjustableYes
Response brightness adjustableYes
Antibacterial treatmentNo
VersionMotion detector
Surface finishGlittering
Width68 mm
Diameter68 mm
Installation width68 mm
Installation depth32 mm
Detection field diameter on floor17m
Detection angle horizontal0 to 170 °
ColorWhite
Remote controllableNo
Frequency50 to 60 Hz
Suitable for C-loadNo
Suitable for ceiling mountingNo
Suitable for wall mountingYes
Suitable for wireless transmissionNo
HVAC controlNo
Halogen freeNo
Height68 mm
Constant light controlNo
Max. range frontal17m
Max. range to one side7m
Min. depth of the device box35 mm
With DALI interfaceNo
With remoteNo
Mounting typeFlush-mounted
Extension inputNo
Nominal voltage230V
SurfaceUntreated
Optimal mounting height1.2m
RAL number (similar)9010
Impact resistanceIK04
IP protection)IP20
Sensor typePassive infrared
Voltage typeAC
Teach function for response brightnessNo
Temperature-15 to 45 °C
Depth32 mm
Animal corridorNo
TransparentNo
Staircase monitoringYes
Creep protection/rear field monitoringNo
NetworkableYes
MaterialPlastic
Material qualityThermoplastic
Theben 2060760 theMura S180 Slave B UP motion/presence detector
Theben 2060760 theMura S180 Slave B UP motion/presence detector
€66.91
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart