The self-adhesive thin-bed heating mat with a connecting cable is ready for installation and was specially developed for installation in leveling compound or flexible adhesive directly underneath the floor covering. Due to the low installation height of only 4.0 mm, it is ideal for the renovation and modernization of bathrooms, showers, kitchens, etc. This floor temperature control system is particularly suitable for subsequent installation in angled and/or large rooms, as there is no need to return the second connection. The Teflon-insulated heating cable with additional protective braiding for use with the residual current circuit breaker is attached to a plastic net. The length of the connecting cable is 4.0 m. PTC thermistor: 4m, 1.0mm2, Voltage: 230 V, Nominal limit temperature: 90°C, Insulation: PVC / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Smallest bending radius: 6 x dA, Protection class: IPX7, Approval: EN 60335-2-96, Mat height: 4.0 mm, Calculation width 50 cm, Delivery width: 48 cm,
