Ready-to-install heating cable with a connecting cable, suitable for embedding in asphalt surfaces. The heating cable meets the requirements of IEC 60800 and EN 62395. With additional protective braiding for use with the FI protection circuit. Including a factory-fitted waterproof sleeve and a 10m long PTC thermistor. Voltage: 400 V, nominal limit temperature: 90°C, installation temperature: short-term 240°C, deformation strength 2000 N, tensile strength: 120 N, heating cable insulation: FEP, PTC thermistor: 1 x 10 m 2.5mm, specific heating output: 30 W/m, resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, smallest bending radius: 5 x dA, protection class: IP X7, length: 17.5 m, 520 W
