With fuseNo
Rated operating current Ie1.5 A
External reset possibleNo
With transformerNo
Design of electrical connection for auxiliary and control circuitScrew connection
Type of motor starterDirect starter
Rated operating current at AC-3, 400 V1.6 A
With short-circuit releaseYes
Temperature-compensated overload protectionYes
Ambient temperature, upper limit without restrictions55 °C
Rated operating power at AC-3, 230 V, 3-phase0.25 kW
Assignment type according to IEC 60947-4-3Class 2
Conditional rated short circuit current, allocation type 2, 400 V50000 A
HABMSC-D-1,6-M7 (240V50HZ)
HAN115919
GTIN4015081156597
Connection type main circuitScrew connection
Number of auxiliary contacts as normally open1
Trigger classCLASS 10 A
Rated operational power at AC-3, 400 V0.55kW
Rated control supply voltage Us at AC 50 Hz240V
Width45 mm
Suitable for EMERGENCY STOPNo
Height180 mm
IP protection)IP20
Protection class (NEMA)Other
Voltage type for actuationAC
Depth95 mm
Mounting rail possibleYes
Supports protocol for AS-Interface Safety at WorkNo
Supports protocol for ASINo
Supports protocol for CANNo
Supports data highway protocolNo
Supports protocol for DeviceNetNo
Supports protocol for DeviceNet SafetyNo
Supports protocol for EtherNet/IPNo
Supports protocol for Foundation FieldbusNo
Supports protocol for INTERBUSNo
Supports protocol for INTERBUS-SafetyNo
Supports protocol for LONNo
Supports protocol for ModbusNo
Supports protocol for PROFIBUSNo
Supports protocol for PROFINET CBANo
Supports protocol for PROFINET IONo
Supports protocol for PROFIsafeNo
Supports protocol for SERCOSNo
Supports protocol for SUCONETNo
Supports protocol for SafetyBUS pNo
Supports protocol for TCP/IPNo
Supports protocol for other bus systemsNo
Overload release current setting1 to 1.6 A
