Catalog

Eaton M22-CK10 contact element 1 NO contact, front mounting, spring terminal, 216384

In stock
SKU: 220648
€4.51
Into a basketIn the basketGo

Overview

Contact element, standard/approval: UL/CSA, IEC, size: NZM1/2/3/4, connection technology: Cage Clamp, fastening: front fastening, description: Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH, Minden, contact configuration S = normally open: 1 S, protection class: IP20, connection to SmartWire-DT: no, connection type: single contact, description of tripped auxiliary switch HIA: General trip message '+' when triggered by a voltage release, overload release, short-circuit release or when the residual current release is used by a residual current., Use with circuit breaker size NZM1, 2, 3: One tripped auxiliary switch can be clipped into the circuit breaker., Use with circuit breaker size NZM4: Up to two tripped auxiliary switches can be clipped into the circuit breaker., Any combination of auxiliary switch types is possible., Not in conjunction with load disconnector PN., Marking in the switch: HIA., Marking in the FI block: HIAFI., When using the tripped auxiliary switches in the FI block, the normally closed contact works as a normally open contact and the normally open contact works as an normally closed contact., Description of the normal auxiliary switch HIN: Switches with the main contacts. Takes over signaling and locking tasks., Use with circuit breaker size NZM1: A standard auxiliary switch can be clipped into the circuit breaker., Use with circuit breaker size NZM2: Up to two standard auxiliary switches can be clipped into the circuit breaker., Use with circuit breaker size NZM3, 4: Up to three standard auxiliary switches can be clipped into the circuit breaker., Any combination of auxiliary switch types is possible., Marking in the switch: HIN., When combined with remote drive NZM-XR..., the right-hand installation location of the standard auxiliary switch HIN can only be equipped with single contacts., Can be used for: NZM1 (-4) , 2 (-4) , 3 (-4) , 4 (-4) , PN1 (-4) , 2 (-4) , 3 (-4) , N (S) 1 (-4) , 2 (-4) , 3 (-4) , 4 (-4) , Standards and regulations: IEC 60947-5-1

PropertyValue
Number of contacts as normally open:1
Mounting type:Front mounting
Type of electrical connection:Spring-loaded connection
Design:plug-in and integrable
Rated operating current Ie at AC-15, 230 V:6 A
Socket:without

Characteristics

HABM22-CK10
ManufacturerEaton
HAN216384
GTIN4015082163846
Number of contacts as normally open1
VersionAttachable and integrable
Design of the electrical connectionSpring-loaded connection
Rated operating current Ie at AC-15, 230 V6A
VersionWithout
Mounting typeFront mounting
Eaton M22-CK10 contact element 1 NO contact, front mounting, spring terminal, 216384
Eaton M22-CK10 contact element 1 NO contact, front mounting, spring terminal, 216384
€4.51
Into a basketIn the basketGo
Delivery in Europe
We will deliver your order to all European cities.
In cash, by bank card or online
We are located
8200-121 Albufeira.R. Dr. Diogo Leote 35.
24 hours
We will send the order within 24 hours.
HomeCatalogSearchProfile0Cart