Door station video 4/1 2-wire stainless steel matt ONE. Video outdoor station for intercom system in accordance with DIN EN 50486 in 2-wire technology. Outdoor station for installation in separately available UP or AP housings, consisting of a 2 mm thick front panel made of matt brushed stainless steel with speech and camera opening, color camera with scratch-resistant cover, screwless fastening for housing (surface-mounted/flush-mounted) with snap-in spring mechanism and opening mechanism with vandal protection, flush-mounted nameplate(s) (changeable from the front) with call button(s) including white LED backlighting and plug-in connection terminal block with screw terminals. Pre-wired front panel with electronic components in encapsulated monoblock design with loudspeaker, microphone and camera. Device configuration via rear LED display with 3 soft keys and 7-segment display, display mode can be rotated 180 degrees for optimal readability and usability as well as automatic addressing when the power is switched on for the first time. Button lighting is switched on depending on the ambient light, can be adjusted to the ambient conditions using a brightness sensor. Functions: Camera can be switched on and locked horizontally and vertically from the front, integrated IR lighting is switched on depending on the ambient light to support the camera function in the dark, integrated camera heating to prevent condensation and frost on the camera ball. Integrated door opener contact, call button with light/door opener/relay function adjustable. Volume, microphone sensitivity, door opener function and call button backlight adjustable. Call button with acknowledgement tone (can be switched off) and tactile feedback. Loudspeaker and microphone protected against sabotage. One-man commissioning through LED display configuration.
