Plug-in/print relay, bistable (remanence relay with one coil), 2 changeover contacts for 8 A / 250 V AC Contact pin pitch: 5.0 mm Contact material AgNi, coil data 110 V AC/DC*, 1 W / 1 VA, 11000 Ohm *external components are required for resetting and controlling with an AC voltage (see Series 40 catalog) Relay protection class: RT II
| Property | Value |
| Number of contacts as changeover contacts: | 2 |
| Rated control supply voltage Us at AC 50 Hz: | 110 V |
| Rated control supply voltage Us at AC 60 Hz: | 110 V |
| Rated control supply voltage Us at DC: | 110 V |
| Type of voltage for actuation: | AC/DC |
| Design of the electrical connection: | Plug connection |
| Drive, polarity: | polarized |
| Height: | 25 mm |
| Width: | 12.4 mm |
| Depth: | 29 mm |
| Switching behavior of the drive: | Remanence |
| Type of switching contact: | Single contact |
| With positively guided contacts: | no |
| With removable terminals: | no |
| Complete device with base: | no |
| Protection class (IP): | IP20 |
| Rated current: | 8 A |
| With LED display: | no |
