Metal safety screw connection 90° angle USW-M, IP 40 suitable for metal protection hoses SPR-CU / SPR-EDU-AS / FLEXAgraff-CU-AS metric external thread, including inner sleeve, brass pressure ring (EMC) and O-ring, screw connection housing with hexagon wrench surface Material: housing nickel-plated brass Temperature range: -40°C ... +250°C Properties: high dust and liquid protection / force-locking connection of hose and screw connection / perfect earthing / covering of the hose ends / vibration and tensile strength
| Property | Value |
| Protection class (IP) depending on hose: | 40 |
| Nominal diameter: | 45.0 mm |
| Largest outside diameter of the hose: | 45.0 mm |
| Smallest inside diameter of the hose: | 38.0 mm |
| Thread connection size: | M50 x 1.5 |
| Perm. in combination with protective hose DIN EN 61386-23: | yes |
| Total length: | 77.0 mm |
| Total height: | 69.0 mm |
| Thread length: | 12.0 mm |
| Rotatable thread: | no |
| Nominal size in inches: | 1 1/4 inch |
| Design: | 90° angle |
| Construction: | External thread |
| One-piece: | no |
| Approved in combination with protective hose UL: | no |
| Approved in combination with protective hose CSA: | no |
| Approved in combination with protective hose FI: | no |
| Material of the housing: | brass |
| Surface: | nickel-plated |
| Operating temperature: | -40 to 250 °C |
| Thread number: | 1.5 |
| Thread type: | metric |
| Type of connection of the screw connection to the housing: | thread |
| Number of entries: | 1 |
| With earth connection: | no |
