eNet radio operating attachment with arrow symbols, stainless steel Features: Operation on switching, dimming or blind insert or 3-wire extension insert of System 3000. Manual, radio and time-controlled operation of e.g. blinds, roller shutters, awnings, lighting or fans. Transmitter for radio transmission of switching, dimming and blind commands. Night mode can be set. Status and function LEDs do not light up permanently. Status feedback to radio transmitter. Status display with LED. Evaluation of the extension inputs. Functions in combination with blind insert: Positioning of blinds via scene call-up. Position for sun protection and twilight. Running time and ventilation position of the blind can be saved. Functions in combination with light insert: Scene operation possible. Switch-on brightness can be saved permanently when combined with dimming insert. Functions in combination with 3-wire extension: Power-supplied eNet transmitter. Control of lighting. Control of shading. Can be set with eNet Server from version 2.3 (depending on use): Fully encrypted radio transmission (AES-CCM). Deactivate extension evaluation. Operating locks. Reversal time for blinds, roller shutters and awnings can be set. Direction of travel can be inverted. Position for sun protection, twilight, lock-out protection and wind alarm. Maximum brightness, minimum brightness and dimming speed can be set. Function of the status LED can be set as a status LED actuation display. Follow-up time. Switch-on or switch-off delay. Dimming up or down ramp. Switch-off warning. Permanently on, permanently off. Hotel function. Light control. Repeater function. Update of the device software. Notes: When using a metal attachment and/or a metal cover frame, the range may be reduced. The radio approval applies to EU and EFTA countries.
