Door communication flush-mounted switching actuator Features: Flush-mounted switching actuator for controlling an external gong or other consumers via the Gira door communication bus. Control of a potential-free switching contact (24 V SELV 50 A to 1.6 A AC DC) via the 2-wire bus. The flush-mounted switching actuator can be controlled via: the 'door' and 'light' buttons on the home station, the floor call button on the home station, the call button on the door station, the call button on the home station, the buttons on a telephone (in conjunction with the TKS-TK gateway), a potential-free button (in conjunction with the 2-way door communication button interface). The flush-mounted switching actuator can be operated in four different operating modes: switching, timer s, timer min and pulse. Pulse function for controlling existing staircase automation. Switching time can be continuously adjusted from 1 to 10 s or 1 to 10 min depending on the function set. LED display for programming, function selection and time setting. Notes: The flush-mounted switching actuator is intended for installation in a deep device box (60 mm deep) behind a door communication bus coupler.
